Temporary Services

Service will be provided for construction or other purposes on a temporary basis at a cost to be determined by the Company.

For temporary service during construction in overhead areas where the service line will eventually be transferred to the building, the Customer shall install a structure as shown in Figure 1 or a structure of similar strength. Such a structure shall be located not in excess of one span (100 feet or less depending on wire size) from the Company's service pole so that the service drop can be transferred to the building.

For temporary service in residential areas with underground supply lines, the Customer will furnish and install a temporary service pedestal as shown in Figure 2.

For temporary service in other underground areas or where no Company facilities exist, consult the Division Office.

For all temporary services, the Customer must supply a lock for the service equipment and keep it locked at all times.

Application For Service

This application should be made to the Company either by telephone, letter, or in person. Telephone inquiries should be made to the appropriate Division Office using the telephone numbers shown on Pages 3 through 5.

Information to be supplied by the Customer shall include:

(a) Customer's name, service address, mailing address, telephone number and community.

(b) Type, capacity, and location of service desired.

(c) The size, phase and number of motors, ranges, water heaters, air conditioners, electric space heating units, and other major appliances; and if other than residential, the total connected lighting and other loads in kilowatts.

(d) Size and configuration of the service-entrance conductors.

(e) Size of hub required in cases where the Company supplies the meter socket.

(f) Name, address and phone number of the electrical contractor.